Product ID:FOAMSEAL SEALANT, 30-45
MSDS Date:12/27/1985
FSC:8030
NIIN:00N037009
MSDS Number: BQRML

Emergency Phone: 612-481-3300

Info Phone: 612-481-3300

Cage: R1331

Telephone: 612-236-5300/ -5309 FAX

Cage: 0DH19

NONHAZARDOUS INGREDIENTS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE CONTACT WILL CAUSE
IRRITATION. PROLONGED OR REPEATED SKIN CONTACT WILL CAUSE
IRRITATION. CHRONIC: NO ANTICIPATED CHRONIC EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH IMMED WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. CONSULT A PHYSICIAN IF IRRITATION PERSISTS. SKIN: WASH
CONTACT AREA WITH SOAP AND WATER. INHAL: REMOVE TO FRESH AIR.
SUPPORT BRTH G (GIVE O*2/ARTF RESP) . INGEST: CALL MD IMMED .

Flash Point:>392F,>200C
Extinguishing Media:EXTINGUISH WITH DRY CHEMICAL, FOAM, WATER
SPRAY/CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:ONE.

Spill Release Procedures:SCRAPE UP AND PLACE IN DISPOSAL CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:REMOVE AND LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:<2

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS, CARBON MONOXIDE.

Waste Disposal Methods:THIS PRODUCT DOES NOT MEET THE DEFINITION OF
HAZARDOUS WASTE UNDER 40CFR261. LANDFILL I/A/W STATE, FEDERAL AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.